Miller- Grip Anchorage Connectors

The Miller  Grip Anchorage Connectors are a  Portable/reusable anchorage connectors designed for use in concrete applications.

Model 496: Shown Above , ( More Images 1 )

Designed for single user fall protection applications. A safe 5,000 lb. anchor point is established by drilling a 3/4-inch diameter hole in cured concrete and inserting the Miller Grip anchor.  (This unit is color-coded green to indicate fall protection use only) A variety of connecting devices including a shock-absorbing lanyard or self-retracting lifeline can be attached to the Miller Grip.

Model 497:

Designed for single user fall protection applications or as anchorage connectors. A safe 10,000 lb. anchor point is established by drilling a 1-inch diameter hole in cured concrete and inserting the Miller Grip anchor. (This unit is color-coded green to indicate fall protection use only.)


Features / Key Points:
*Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchorage. Careful consideration should be given to selecting a proper anchorage for ultimate safety. The anchorage should be easily accessible, located a safe distance above any lower obstacles and support 5,000 lbs. (22kn) per worker.

• A safe anchor point is established when the Miller® Grip™ anchor is inserted into a properly-sized, cured concrete hole
• Designed for use in cured concrete with a compression strength of at least 3,000 psi
• The reusable Miller Grip anchor can be removed and simply re-installed in a new location
  
• Designed for vertical or overhead/ceiling surface applications 
• Constructed of stainless steel, aluminum and other non-corrosive materials for a longer service life
• Color-coded to differentiate fall protection from multi-use models per OSHA regulations