Draeger X-act® 7000 -
The Draeger X-act® 7000 is an innovative analysis system that consists of Draeger MicroTubes and an opto-electronic analysis device that lets you precisely measure gases in the low ppb range. It gives you precise results right on site, replacing slow, expensive lab analyses. It's extremely easy to use: insert the Draeger MicroTubes, start measuring, then read out the test result.
The Draeger X-act® 7000 analysis system is immediately ready for use. It is suitable for testing with all available Draeger MicroTubes. Simply insert the right Draeger MicroTube for your testing needs. The automatic drive carefully draws the MicroTube in and positions it. Control your test using the 3-button control and 2.4 inch colour display. When the test is complete, the green LED will glow and a message is displayed on the screen. You can store the test result, location and time in the internal data logger and read it later using the Draeger CC Vision software. The device is powered by five easily replaceable AA alkaline batteries. The battery life lasts for more than ten hours of testing and can be read on the display.
Draeger X-act® 7000 Specifications
*Micro-Tubes for the Draeger X-act 7000 sold separately.
| Additional Info | The Draeger X-act® 7000 (8610800) standard items include: |
|---|
Available Micro-Tubes for the Draeger X-act® 7000-
| Description | Test Range | Test Time (min-max) | Part Number |
| Acetone | 25 – 5,000 ppm | 20 – 500 seconds | 8610470 |
| Alcohol (Methanol) | 10 – 5,000 ppm | 20 – 450 seconds | 8610380 |
| Alcohol (Ethanol) | 5 – 2,500 ppm | 20 – 450 seconds | 8610380 |
| Alcohol (i-Propanol) | 10 – 5,000 ppm | 20 – 450 seconds | 8610380 |
| Alcohol (n-Butanol) | 7 – 3,330 ppm | 20 – 450 seconds | 8610380 |
| Ammonia | 1 – 100 ppm | 10 – 75 seconds | 8610130 |
| Ammonia | 100 – 2,500 ppm | 3 – 45 seconds | 8610020 |
| Benzene | 1 – 150 ppb | 100 – 900 seconds | 8610600 |
| Benzene | 0.15 – 10 ppm | 25 – 150 seconds | 8610030 |
| Benzene | 10 - 100 ppm | 10 - 75 seconds | 8610280 |
| 1,3-Butadiene | 25 – 500 ppb | 200 – 600 seconds | 8610460 |
| 1,3-Butadiene | 0.5 – 25 ppm | 10 – 280 seconds | 8610300 |
| Carbon Dioxide | 200 – 50,000 ppm | 2 – 120 seconds | 8610190 |
| Carbon Monoxide | 2 – 1,000 ppm | 5 – 300 seconds | 8610080 |
| Chlorine | 50 – 5,000 ppb | 10 – 400 seconds | 8610010 |
| Demo | NA | approx. 30 seconds | 8610290 |
| Ethylene Oxide | 25 – 250 ppb | 150 – 600 seconds | 8610200 |
| Ethylene Oxide | 0.25 – 10 ppm | 100 – 500 seconds | 8610580 |
| Formaldehyde | 5 – 150 ppb | 360 – 960 seconds | 8610540 |
| Formaldehyde | 0.15 – 3 ppm | 300 – 600 seconds | 8610100 |
| Hydrochloric Acid | 0.5 – 25 ppm | 10 – 100 seconds | 8610090 |
| Hydrocyanic Acid | 0.5 – 50 ppm | 20 – 180 seconds | 8610520 |
| Hydrogen Sulfide | 0.1 – 50 ppm | 5 – 960 seconds | 8610050 |
| Hydrogen Sulfide | 100 - 2,000 ppm | 15 - 180 seconds | 8610220 |
| Mercaptan | 50 – 6,000 ppb | 15 – 360 seconds | 8610360 |
| Mercury | 0.005 – 0.25 mg/m3 | 240 – 1,200 seconds | 8610350 |
| MTBE | 2 - 200 ppm | 60 - 450 seconds | 8610530 |
| Nitrogen Dioxide | 0.25 – 50 ppm | 10 – 210 seconds | 8610120 |
| Nitrous Fumes | 10 – 1,000 ppm | 10 – 240 seconds | 8610260 |
| Ozone | 10 - 1,000 ppb | 50 - 840 seconds | 8610430 |
| Perchloroethylene | 1 – 500 ppm | 25 – 240 seconds | 8610040 |
| Petroleum Hydrocarbons | 10 – 3,000 ppm | 10 – 360 seconds | 8610270 |
| Phosgene | 10 – 1,000 ppb | 10 – 300 seconds | 8610340 |
| Sulfur Dioxide | 0.05 – 5 ppm | 20 – 480 seconds | 8610110 |
| Toluene | 10 – 1,000 ppm | 6 – 360 seconds | 8610250 |
| Trichloroethylene | 0.25 - 50 ppm | 20 - 270 seconds | 8610320 |
| Xylene | 10 – 1,000 ppm | 10 – 240 seconds | 8610260 |
MicroTube Alcohol (8610380) Methanol is the calibration substance. Other alcohols are displayed with the following sensitivity:
*Ethanol with twice the sensitivity: Indication in the display ÷ 2 = ppm ethanol (applies to the measuring range 5 – 2,500 ppm ethanol)
*i-Propanol with the same sensitivity: Display = ppm i-propanol (applies to the measuring range 10 – 5,000 ppm i-propanol)
*n-Butanol with one and a half times sensitivity: Indication in display ÷ 1.5 = ppm n-butanol (applies to the measuring range approx. 7 – 3,300 ppm n-Butanol)
Easy to use- After an automatic self-test, the X-act 7000 analysis system is immediately ready for use. It is suitable for testing with all available Dräger MicroTubes. Simply insert the right Dräger MicroTube for your testing needs. The automatic drive carefully draws the MicroTube in and positions it. Control your test using the 3-button control and 2.4 inch colour display. When the test is complete, the green LED will glow and a message is displayed on the screen. You can store the test result, location and time in the internal data logger and read it later using the Dräger CC Vision software. The device is powered by five easily replaceable AA alkaline batteries. The battery life lasts for more than ten hours of testing and can be read on the display.
Measures the lowest-quantity concentrations with lab-quality analysis- Concentrations of hazardous substances in ambient workplace air must never exceed the defined limits. Monitoring these sometimes very low concentration levels is a responsible task. The Dräger X-act 7000 in combination with Dräger MicroTubes is focused on measuring carcinogenic and toxic substances in the low ppb range. This sensitive testing system is based on colorimetric chemical sensors capable of replacing conventional laboratory analysis and providing precise results right on site. This saves time and money.
More safety thanks to high selectivity- The substance-specific reactive layers and multiple pre-layers in the Dräger MicroTubes allow for selective gas testing. The various layers serve as a filter. During testing, they filter out other substances that occur in the workplace so that only the target substance is reflected in the test result. This significantly reduces crosssensitivities and the number of false-positive test results.
Explosion-proof and ready to use- The RFID tags applied to the Dräger MicroTubes contain all the calibration data that apply throughout their normal lifespan of one year. This eliminates the need for lengthy function tests and manual calibration. Because it works on the basis of mass-flow measurement, air pressure fluctuations have no influence on the device. Any possible temperature or humidity influences are already accounted for during the factory calibration. The analyzer is explosion-proof and certified under ATEX and CSA. The system is also dust- and splash-resistant in accordance with IP54. It also meets the requirements for electromagnetic compatibility under EN 61326-1.
Also suitable for remote sampling- Using the coupler (connector piece), the Dräger X-am® Pump can be attached to the X-act 7000. This allows you to test for carcinogenic and toxic substances in the ppb range, even in hard-to-reach places like ducts, pipelines or tanks up to a distance of 45 meters (147.6 feet). Because the X-am Pump is also certified explosion-proof for Zone 0, it is perfectly suited for these tasks.
