Draeger X-act 5000 Basic
Draeger X-act 5000 Basic-
The Draeger X-act 5000 Basic all-in-one, automatic pump is used in conjunction with the colorimetric Draeger-Tubes and simultest sets for taking measurements on the spot with direct reading results. The pump may be programmed to take from 1 to 200 strokes enabling measurements into the ppb range. The X-act 5000 Basic also features a constant flow mode for use with sorbent tubes like charcoal and silica gel at flow rates over the range of 0.1 to 2.0 L/min.
Draeger X-act 5000 Basic Specifications- ( for use with only Draeger Colorimetric Gas Tubes )
| Dimensions (without clip) (W x H x D) | approx. 175 x 230 x 108 mm (7“ x 9“ x 4.25“) |
| Weight (without Battery Pack) | approx. 1.6 kg (3.5 lbs) |
| Max Tubing Distance | up to 30 meter (98 ft.) |
| Stroke volume | 100 mL |
| Number of strokes |
adjustable, 1 to 199 strokes |
| Flow rate range | 0.1 to 2.0 L/minResolution 0.1 to 1.0 L/min: 0.1 L/min ± 10 % Resolution 1.0 to 2.0 L/min: 0.2 L/min ± 10 % |
| Air pressure | 700 to 1,300 hPa (10.2 to 18.9 psi) |
| Air humidity | 0 to 95 % r. h., non-condensing |
| Temperature | 5 to 40 °C (41 to 104 °F) (while in-use) |
| Approvals: cCSAus, IECEx, ATEX, CE |
Class I, Div. 1, Group A, B, C, D Class II, Div. 1, Group F, G 5 °C ≤ Ta ≤ + 40 °C Temp. Code T4 Ex ia |
Automatic tube pump‒
‒ Ideal for a high number of strokes
‒ can be used in explosive areas
‒ highly visible end of measurement indicator
Versatile and robust-
The automatic tube pump is compatible with Dräger short-term tubes as well as sampling tubes and systems. The robust housing supports the use of the pump to perform the daily measuring tasks under tough conditions. The ex-approved Draeger X-act® 5000 Basic can be used for confined space applications and in explosive gas atmospheres.
Measurement in technical gases-
To evaluate measurements in technical gases, the properties of the technical gas must be taken into consideration. Technical gases have a different viscosity than ambient air. Therefore, the flow of the pump must be set accordingly. Following the operating steps in the mode „Measurement in Technical Gases“, the Draeger X-act 5000 Basic will automatically be adjusted to the required flow parameter and the measurement result can be read directly.
