Draeger X-dock 6600 Kit - Up to 6 Calibration Test Gas Connections

Draeger X-dock® 6600-

The Draeger X-dock® 6600​​ is designed for Automatic bump testing, calibrations, reduced test gas consumption, short testing times, and comprehensive documentation for Draeger Gas Detectors. 

The 6600 X-dock® Master Controller by Draeger was specifically designed for use when you have an application for calibrating / testing a Draeger gas monitor that requires more than 3 calibration gas mixtures and/or can handle up to 6 different calibration gas cylinders. Up to 10 each PAC, 1/2/5 Cradle modules or 5 each X-am 3500/8000 modules can be connected to the X-dock®, allowing you to test gas detection instruments simultaneously or independently of each other. The automatic bump test also saves time, because the test only takes 8 to 15 seconds. All Draeger test gas cylinders are already stored in the database—just enter the part number to automatically fill the fields required for the gas configuration, eliminating the need for manual data entry with private label gases. Administration control for what takes place during testing such as configuration of: Date/Time, pulling the Data-logging and/or clearing Data-logging on the unit(s), Check and verify the configuration (5100, 2500, 5000 series), Alarm checks (visual,audible,settings for low and high), auto-zero, calibration / bump testing time, purging, and auto pdf reporting.

The X-dock® engineered advantage all starts with intuitive touchscreen operation at the master controller station
where up to three test routines can be configured. Testing is as simple as inserting your Dräger gas detection
instrument and closing the lid. The X-dock® immediately detects all sensor combinations and automatically
tests and adjusts when all of the required test gases are connected. All generated data is documented in the
database.

Draeger X-dock® Literature