RKI GX-6000 Six Gas Monitor Sample Draw

$0.00

SKU

GX-6000

Choose Monitor:

Choose Sensor:

Choose Smart Sensor 1:

Choose Smart Sensor 2:

Choose Battery Options:

Qty:

Details

RKI GX-6000 Six Gas Monitor Sample Draw -

Capable of monitoring up to six gases simultaneously. Uniquely, it supports dual PID sensors, allowing the installation of two photoionization detectors within a single unit—an industry first. Users can combine a broad-range 10.6 eV PID sensor with a benzene-specific 10.0 eV sensor, facilitating both general VOC detection and targeted benzene analysis without equipment changes. The GX-6000 features a library of over 600 VOCs, customizable favorites, and recent gas lists for quick access. Additional features include a strong internal pump, man-down and panic alarms, LED flashlight, and a rugged IP-67 rated design, ensuring reliability in demanding environments.

The GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6000 will easily alert users when needed.

Sensors available: CL2, CO, CO2, HCN, H2S, NH3, NO2, PH3, SO2, and VOC (volatile organic compounds) Ammonia, Chlorine, Hydrogen Cyanide, Nitrogen Dioxide, Phosphine, Sulfur Dioxide, Carbon Dioxide, Methane, Hydrocarbon, Hydrogen Sulfide, Carbon Monoxide, and Oxygen Monitor.

Specifications

Li-Ion battery pack only with no chargerGases & Detectable Ranges
Gas		Measuring Range	Reading Increment	Alarm Set Points	Accuracy (which ever is greater)
PID Sensors
10.6 Lamp	600 VOC’s	0 – 40,000 ppb	1 ppb: (< 5000 ppb) 10 ppb: (> 5,000 ppb)	A1: 5,000 ppb	± 10% of reading, ± 1 digit
				A2: 10,000 ppb
		0 – 4,000 ppm	0.1 ppm: (< 600 ppm) 1 ppm: (> 600 ppm)	A1: 400 ppm
				A2: 1,000 ppm
10.0 Lamp	Benzene Specific	0.01 – 50 ppm	0.01 ppm (0 ~ 10 ppm) 0.1 ppm (10 ~ 50 ppm)	No Alarms
	300 VOC’s	0 – 100 ppm	0.01 ppm (0 ~ 10 ppm) 0.1 ppm (10 ~ 100 ppm)	A1: 5 ppm A2: 10 ppm
11.7 Lamp	High Voltage Lamp	0 – 100 ppm	0.1 ppm	A1: 5 ppm
				A2: 10 ppm
Galvanic
Oxygen (O2)		0 – 40.0% Vol.	0.1% Vol.	A1: 19.5 Vol.	± 0.5% O2
				A2: 23.5 Vol.
Electro Chemical
Carbon Monoxide (CO)		0 – 500 ppm	1 ppm	A1: 25 ppm	± 5% of reading or ± 5 ppm
				A2: 50 ppm
				TWA 25 ppm
				STEL 200 ppm
Hydrogen Sulfide (H2S)		0 – 100.0 ppm	0.5 ppm	A1: 5.0 ppm	± 5% of reading or ± 2 ppm
				A2: 30.0 ppm
				TWA 1.0 ppm
				STEL 5.0 ppm
Toxics (EC Sensors)
Ammonia (NH3)		0 – 400.0 ppm	0.5 ppm	A1: 25 ppm	± 10% of reading or ± 5% of full scale
				A2: 50 ppm
Chlorine (Cl2)		0 – 10.00 ppm	0.05 ppm	A1: 0.5 ppm
				A2: 1.0 ppm
Hydrogen Cyanide (HCN)		0 – 15.0 ppm	0.1 ppm	A1: 5 ppm
				A2: 10 ppm
Nitrogen Dioxide (NO2)		0 – 20.00 ppm	0.05 ppm	A1: 3 ppm
				A2: 6 ppm
Phosphine		0 – 20.00 ppm	0.01 ppm	A1: 0.30 ppm
				A2: 1.00 ppm
Sulfur Dioxide (SO2)		0 – 99.90 ppm	0.05 ppm	A1: 2 ppm
				A2: 5 ppm
IR Sensors
Carbon Dioxide (CO2)		0 – 10,000 ppm	20 ppm	A1: 5,000 ppm	± 5% of reading or ± 2% of full scale
				TWA 5,000 ppm
		0 – 10.00% Vol.	0.02%	A1: 0.50% Vol
				A2: 3.00% Vol
				STEL 3.00% Vol
				TWA 0.50% Vol
Methane (CH4)		0 – 100% LEL 0 – 100% Vol.	1% LEL/ 0.5% Vol	A1: 10% LEL A2: 50% LEL
Hydrocarbons		0 – 100% LEL 0 – 30% Vol.
Catalytic
Hydrocarbons (CH4, std)		0 – 100% LEL	1% LEL	A1: 10%LEL	± 5% of reading or ± 2% LEL
				A2: 50%LEL

Common Specifications
Alarm Types	Gas alarm	Man-down	Trouble
	Low and high adjustable	1st – self reset 2nd – latching	Low flow Sensor connection Low battery Circuit error Calibration range
Sample Method	Sample draw pump, flow rate 0.45 LPM, 50 foot sample range
Display	Digital LCD, autobacklight, peak bar display, auto display rotation, and customize order of gases
Audible Alarm	95 dB at 1 ft.
Languages	English, Spanish, French, German, Italian, Japanese, Korean, Portuguese, Russian
Continuous Operation	14 hours on Lithium-ion battery pack. Complete recharge in 3 hours. 8 hours Alkaline battery pack (3 AA size within each pack)
Operating Temp. & Humidity	-4°F to 122°F (-20°C ~ +50℃), 0- 95% RH non condensing
Dimensions	2.6” W x 7.8” H x 2” D (H200 x W68 x D52 mm) 14 ounce (400g) (with lithium battery pack)
Case Material	Dust and water resistant with IP-67 approval (exclude sample hose and probe)
Safety Design / Approvals	Explosion proof: IECEx , ATEX , TIIS , cCSAus Explosion class :Ex ia IIC T4 Ga Others: CE Marking
Standard Features	2 Smart sensors slots auto recognize sensor changes Library of over 600 VOC’s User defined VOC list. Up to 30 frequently used Recent VOC list for last 8 selected gases Pump and circuit status indicators User & station ID selection menu Datalogging (interval, alarm trend, station and user ID) Snap logging – on demand data logging Demand zero / Auto zero BUMP and CAL expiration alarm Flashlight IrDA communication LEL sensor protection mode
Standard Accessories	• Rubber boot • Belt clip • Hand strap • Tapper nozzle• Probe with hydrophobic & dust filter 3’ teflon lined hose • Benzene pre-filter tubes and holder (benzene versions)
Optional Accessories	• SDM-6000 calibration station • Bundles with instrument carrying case and accessories • Flexible probes • Up to 50 foot sample hoses • Filter set • IrDA cable
Warranty	Two years material (including sensors) and workmanship. One year for Cl2 and PID sensor (Two months for 11.7 eV lamp)