The store will not work correctly when cookies are disabled.
-
Home
-
RKI Replacement CO2 Sensor IRR-0409 for GX-3R Pro
RKI Replacement H2S Sensor ESR-A13I-H2S for GX-3R Pro
RKI Replacement CO2 Sensor IRR-0433 for GX-3R Pro
RKI Replacement CO2 Sensor IRR-0409 for GX-3R Pro
RKI Replacement CO2 0-10% volume Sensor IRR-0409 for GX-3R Pro -
| Part Number |
Description |
| ESR-A13P-CO |
CO2 Replacement Sensor |
CO2 Safety Data Sheet
Detectable Gases
|
| Gas |
Measuring Range
(Increments) |
Accuracy
Statement |
Preset Alarms |
| Sensor Slot 1: Carbon Monoxide (CO) & Hydrogen sulfide (H2S) *Interchangeable |
| H2S / CO |
Dual EC |
0 ~ 2000 ppm
(1 ppm) |
± 5% of reading
or ± 5 ppm CO |
A1: 25 ppm│ A2: 50 ppm │ A3:1200 ppm│TWA: 25 ppm │ STEL: 200 ppm |
0 ~ 200.0 ppm
(0.1 ppm) |
± 5% of reading
or ± 2 ppm H2S |
A1: 5 ppm│ A2: 30 ppm │ A3: 100 ppm│TWA: 1.0 ppm │ STEL: 5.0 ppm |
H2S
Only |
EC |
0 ~ 200.0 ppm
(0.1 ppm) |
± 5% of reading
or ± 2 ppm H2S |
A1: 5 ppm│ A2: 30 ppm │ A3: 100 ppm│TWA: 1.0 ppm │ STEL: 5.0 ppm |
CO
H2 Compensated |
EC |
0 ~ 2,000 ppm |
± 5% of reading
or ± 2 ppm CO |
A1: 25 ppm│ A2: 50 ppm │ A3: 1200 ppm│TWA: 25 ppm │ STEL: 200 ppm |
| Sensor Slot 2: Combustibles (Methane as standard) |
| CH4 / HC |
Catalytic |
0 ~ LEL (1% LEL) |
± 5% of reading
or ± 2 % LEL |
1st: 10% LEL │ 2nd: 25% LEL │ 3rd: 50% LEL │ Over:100% LEL |
| Sensor Slot 3: Oxygen (O2) |
| O2 |
EC |
0 ~ 40.0% Vol.
(0.10%) |
± 0.5% O2 |
Low 1: 19.5%│ Low 2: 18.0% │High: 23.5%│ Over: 40.0% |
| Sensor Slot 4: Toxics & CO2 *Interchangeable |
| HCN |
EC |
0 ~ 30.0 ppm
(0.1 ppm) |
± 10% of reading
or ± 5 % of full scale |
A1: 5.0 ppm│ A2: 10.00 ppm │ A3: 30.00 ppm│ TWA: 4.7 ppm
│ STEL: 10 ppm |
| NH3 |
0 ~ 400.0 ppm
(0.5 ppm) |
A1: 25.0 ppm │ STEL: 1.0 ppm│
A2: 35.0 ppm│ TWA: 0.30 ppm│A3: 300.0 ppm |
| NO2 |
0 ~ 20.00 ppm
(0.05 ppm) |
A1: 2.00 ppm│ A2: 4.00 ppm │ A3: 20.00 ppm│ TWA: 0.20 ppm │ STEL: 1.00 ppm |
| PH3 |
0 ~ 20.00 ppm (0.01 ppm) |
A1: 0.30 ppm │ STEL: 1.0 ppm │ A2: 0.60 ppm │ TWA: 0.30 ppm │ A3: 0.60 ppm |
| SO2 |
0 ~ 100.0 ppm
(0.05 ppm) |
A1: 2 ppm│ A2: 5 ppm │ A3: 100 ppm│ TWA: 0.25 ppm │ STEL: 0.25ppm |
| CO2 % |
IR |
0 ~ 10.0% Vol.
(0.01%) |
± 5% of reading
or ± 2 ppm |
A1: 0.50% Vol.│ A2: 3.00% Vol. │ A3: 4.00% Vol.│ TWA: 0.50% Vol. │ STEL: 3.00% Vol. |
| CO2 ppm |
0 ~ 10,000 ppm
(20 ppm) |
A1: 5,000 ppm│ A2: N/A │ TWA: N/A│STEL: N/A |
Common Specifications
|
| Sampling Method |
Diffusion sampling standard
(hand aspirator or clip-on motorized pump optional) |
| Display |
Full dot LCD with Autobacklight
and Autorotation |
| Alarm Types |
Gas Alarm |
Trouble Alarm |
- 2 increasing alarms
- STEL
- TWA
- Over scale alarm
- O2 decreasing/
increasing
|
- Sensor disconnection
- Low battery
- Circuit error
- Calibration range error
- Cal or bump due alarm
|
• Man Down Alarm
• Panic Alarm |
| Display of Alarm |
Gas Alarm |
Trouble Alarm |
- Flashing LED’s
- Continuous buzzer (100 db @ 30cm)
- Flashing gas value
- Vibration
|
- Flashing LED’s
- Intermittent buzzer (95 db @ 30cm)
- Display of error message
|
| Operating Temp. & Humidity |
-20°C ~ +50°C
[ -4°F ~ +122°F ]
10 to 90% RH, non-condensing (continuous environment) |
-40°C ~ +60°C
[ -40°F ~ +140°F ]
0 to 95% RH, non-condensing
(temporary environment) |
| Response Time |
Within 30 seconds (T90) |
| Power Source |
Config |
Li-ion |
Alkaline |
| 4-gas + EC |
25 hours |
16 hours |
| 4-gas + EC with Bluetooth |
23 hours |
14 hours |
| 4-gas + IR |
16 hours |
7 hours |
| 4-gas + IR with Bluetooth |
15 hours |
6 hours |
| Dimension & Weight |
2.9” W x 2.6” H x 1.06” D
(Approx. 73 W x 65 H x 26 D mm), 4.58oz (with rubber boot) |
| Case Material |
Dust and water resistant to IP-66/68 (2m,1h) approval. Drop height 23 ft |
| Bluetooth Communication |
BLE: with iOS and Android phone app: RK Link |
| Datalogging |
Logs user ID, station ID, Calibration & Bump Test history, Alarm Events &
Alarm Trends |
| Standard Accessories |
Alligator clip, protective rubber boot, charger, calibration adapter |
| Optional Accessories |
- Padded carrying case
- RP-3R Attachable sampling pump with 4” rubber nipple, 10’ hose and probe (up to 40’ hose available)
- USB to IrDA downloading cable for datalogger
- SDM-3R calibration station
- Hand aspirator
|
| Safety Design / Approvals |
ATEX, CSA, TIIS |
| Warranty |
Three years material and workmanship including sensors (1 year for Ammonia sensor)
|
